Description
SPECIFICATIONS
Brand Name: kayesmart
Origin: Mainland China
DIY Supplies: ELECTRICAL
Display Type: Digital Only
Model Number: WiFi Double Energy Meter
Certification: CE
Certification: RoHS
Rated Voltage: 100-240V AC 50/60Hz
Measurable Current Range: 0.2A-80A
WiFi Frequency: 2.4GHZ (Not Support 5Ghz)
Ambient Temperature Range: -10°C ~ 55°C
APP: Smart Life / Tuya Smart
Tuya Smart WiFi Double Energy Meter Solar PV System Power Production Consumption Bidirectional Monitoring Meter APP Control 1/2CT
2 Channels For Reverse and Forward direction
1 Channle or 2 Channels are available to Choose
And you can read from App for each Channel
- Real-time total power of 2 channels of reverse and forward direction
- Power for Channel A and B Separately(W)
- Current(mA)
- Voltage(V)
- Power factor, and Frequency(Hz)
Electricity Statistic for each channel in Forward and Reverse direction.
Hourly Elec. (KWh)
Daily Elec. (KWh)
Monthly Elec. (KWh)
-Yearly Elec. (KWh)
Technical data:
Rated Voltage:100-240V AC 50/60Hz
Measurable Current Range: 0.2A-80A
WiFi Frequency: 2.4GHZ (Not Support 5Ghz)
Ambient Temperature Range:-10°C ~ 55°C
Feature:
1.App can display Channel A and B Real-time power, current, voltage, power factor and frequency for Forward and Reverse direction clrealy
2.Electricity Statistic: Channel A , B Separately and Total daily monthly, yearly Reverse and Forward Direction
3.Automation.It allows to make a Scene for this device working with other tuya devices
4.Wiring Diagram. 1. To measure the power 'from Grid' and 'To Grid'.2. Measure the power consumption
5.Non-connect to Be Safe, Easy and Safe to Install.
Q&A
Q : After I configure it with App , why App shows 'shutdown' ?
A : Only if you put a device's wire (either live wire or neutral wire, not both) in the clamp, and turn on the device, then the clamp can sense the current, and App will show it is working
Q : I suppose P= U*I, why the value shows on App is not correct ?
A : Please consider the cos(Φ).
Because As resistances do not produce any phasor difference (phase shift) between voltage and current waveforms, all the useful power is delivered directly to the resistance and converted to heat, light and work. Then the power consumed by a resistance is real power which is fundamentally the circuits average power.
To find the corresponding value of the real power the rms voltage and current values are multiplied by the cosine of the phase angle, Φ as shown.
Real Power P = I2R = V*I*cos(Φ) Watts, (W)